Get a Quote

Enter Coupon Code WINSHIP at Checkout for 50% Off Shipping during the 2010 Winter season!
Shipping Promotion valid for delivery within the continental United States only

Complete the worksheet below for a basic Metal Spiral Stair Kit quote.
Call 1-800-523-7427 for quotes on Oak and Victorian Kits.

Stair Diameter

Your finished well opening must be 2" larger than the diameter of the stair you plan to install. Remember, this is a finished measurement, so be sure to factor in the width of any wood or other finishing you plan to use to complete your well opening. If you require anything other than a standard square opening, you'll need to call us for landing options.

If your local area requires stairs that conform to standard IRC building code requirements, be sure to select a stair diameter that includes CODE in the description.


Height

Please enter your desired finished-floor-to-finished-floor height in feet and inches.

 feet    inches    fractional inches

See the FAQs section for any questions on this measurement.

 

For online ordering, we've made a limited number of accessories available. If you don't see a specific accessory, please call 1-800-523-7427.

Handrail and matching End Cap Options:

1-1/4" Diameter Aluminum Handrail  $305
Round Aluminum Tube Coil
CODE models include a 1 1/4" Aluminum Handrail;
1-1/4" Diameter Brass Handrail  $405
Round Brass Tube Coil
1-1/4" Diameter Brass Handrail
(CODE Stair Kit Upgrade)  $195
Round Brass Tube Coil

Spindle Options:

(CODE models include Triple In-Between Spindles to provide less than 4" space between spindles.)
Single In-Between Spindles (each) $20
(for 3'6", 4'0", and 4'6" diameter stairs only)
Galvanized Single In-Between Spindles (each) $30
(for 3'6", 4'0", and 4'6" diameter stairs only)
Double In-Between Spindles (two spindles) $40
(for 3'6", 4'0", and 4'6" diameter stairs only)
Galvanized Double In-Between Spindles (two spindles) $60
(for 3'6", 4'0", and 4'6" diameter stairs only)

Center Pole Cap:

(All stair kits include a rubber pole cap.)
1-1/16" Oak Mill Finish Pole Cap  $50
Aluminum Pole Cap  $45
Ball-Style Aluminum Cap  $55
3-1/2" Diameter Brass Ball Pole Cap  $85

Railing & Gate Options:

Balcony Landing Railing
(For loft/balcony applications where landing will have
an open side that requires an additional landing rail —
price automatically calculated based on stair diameter.)
Add Galvanized Finish  ($55 additional)

Top Landing Gate
(Price automatically calculated based on stair diameter.)
Add Galvanized Finish  ($55 additional)

Tread and Landing Coverings:

1-1/16" Oak Mill Finish Tread Coverings
(Interior use only. Price automatically calculated based on
stair height and diameter.)
3/4" Flakeboard Tread Coverings
(Interior use only. Price automatically calculated based on
stair height and diameter.)
Raised Diamond Pattern
Steel Plate Treads + Landing
(For interior or exterior use — price automatically calculated
based on stair height and diameter.)

Finishes:

Hot-Dipped Galvanized Finish — Raised Diamond Pattern
Steel Plate Treads + Landing
(For interior or exterior use — price automatically calculated
based on stair height and diameter.)

Stainless Steel Hardware and
Aluminum Dome Top Cap  $80
(For exterior use with all kits.)

Hot-Dipped Galvanized Finish
(Includes Stainless Steel hardware and aluminum dome top.)
(For exterior use — price automatically calculated
based on stair height and diameter.)

 
(Click here to see the total cost of your stair kit.)

*Certain exclusions apply. Half price shipping offer is valid on all Metal Spiral Stair Kits shipped to a final destination within the continental United States (does not include Alaska or Hawaii). Offer good on one stair only per household or office. Half price shipping promotion cannot be applied to previous or pending orders. Offer not valid on express or expedited shipping, nor on special handling.