Building Code Specifications
The Iron Shop’s Code Stair Packages will address and meet compliancy with each of
the requirements that are listed below. This information will apply to the BOCA
Code, UBC Code, IRC 2003, IRC 2006, IBC2006, and IFC 2006 codes.
Please
see our detailed Blueprint/Standard Plan for more information.
IRC 2006 Stair Building Code
R311.5.8.1 Spiral Stairs. Spiral stairways are permitted, provided the minimum width
shall be 26 inches (660 mm) with each tread having a 7 1⁄2 inch (190 mm) minimum
tread depth a 12 inches from the narrower edge. All treads shall be identical, and
the rise shall be no more than 9 1⁄2 inches (241 mm). A minimum headroom of 6 feet,
6 inches (1982 mm) shall be provided (See diagram below).
- Minimum clear walking path of 26 inches. A 5-foot diameter or larger
stair will provide this width.
- Each tread will have a minimum tread depth of 7 1/2 inch at 12
inches from the narrow edge.
- All treads will be identical.
- The tread rise shall not be more than 9 1/2 inches high.
- Landing width shall not be less than the required width of the stairway.
Minimum spiral stair tread width is 26 inches.
|
|
- Minimum headroom of 6 foot 6 inches shall be provided,
measuring plumb from the edge of the landing down to the tread below.
- Stair balusters shall be spaced so a 4-inch object cannot pass
between. The IRC 2003 & 2006 permits a 4 3/8 inch space.
- Balcony/Well Enclosure guardrail balusters shall be spaced so a 4-inch object cannot
pass between.
- Balcony/Well Enclosure guardrail height shall not be less than 36 inches. (If your
state or municipality requires 42-inch tall guardrails, the sales order must reflect
this detail.)
- The stairway shall be equipped with one handrail on the wide edge of the tread.
- Handrail height, measured vertically from the tread nosing, shall
be not less than 34 inches and not more than 38 inches.
- Handrail grip size. Handrails with a circular cross section shall have an outside
diameter of at least 1 1/4 inches and not greater than 2 inches. If the handrail
is not circular, it shall have a perimeter dimension not greater than 6 1/4 inches.
Handrails with a perimeter greater than 6 1/4 inches, shall provide a graspable
finger recess area on both sides of the profile.
- A 300 lb. concentrated load is required. Please
see our detailed Blueprint/Standard Plan for more information.
The Iron Shop's standard spiral package does not address the open space between
each tread (open rise stair). *If your code, IRC 2003, IRC 2006 or IFC 2006 requires
not more than a 4" space in this area, you will need to order our riser bars, Lip-up
design treads, or riser plates.
Please check with your local building department/code enforcement office for the
exact requirements for your municipality.
top