Gallery

Have Questions?

5’0” CODE WELDED ALUMINUM STAIR

5’0” diameter CODE custom welded aluminum stair with included triple in-between spindles, optional diamond plate lip-up design treads, balcony landing rail and black powder coat finish.

5’0” CODE ALUMINUM STAIR

5’0” diameter metal kit with included right hand up 1.25” aluminum handrail and triple in-between spindles, optional TREX^® tread coverings, and gloss black powder coat finish.

29° DIAMOND PLATE ALUMINUM TREADS

Bird’s eye view of aluminum diamond plate treads. Customer selected a continuous sleeve center pole with triple in-between spindles primed in matte black. Aluminum does not rust but will oxidize over time, so some maintenance is required.

7’0” CUSTOM MULTI-STORY STAIR

7’0” 2 story metal stair with continuous sleeve and 5-line pipe handrail, balcony rail, and landing railing, intermediate landing and treads include clear coated white oak tread coverings. Customer selected hunter green custom powder coat finish for stairs and rails.

VICTORIAN ONE^® CAST ALUMINUM KIT

5’0” diameter stair with optional double in-between spindles, scroll design tread ends, custom intermediate landing at lower level, 42” high double top railings on landings and upper portico, matching stair railings to third floor platform, and black powder coat finish.

5’0” OAK KIT

5’0” diameter natural oak kit with optional in-between spindles, solid oak handrail, extended landing, and matching floor mounted balcony railing. Homeowner chose to clear coat the oak components.

6’0” OAK KIT

6’0” diameter oak kit with included triple in between spindles and optional rounded handrail with hand groove, 60° landing, bottom newel post, balcony condition rail and post. Additional loft rails and posts fabricated and installed by homeowner. Homeowner applied cherry stain and clear topcoat to match flooring.

5’0” CODE ALUMINUM STAIR WITH TREAD COVERS

5’0” diameter metal kit with included right hand up 1.25” aluminum handrail and triple in-between spindles, optional TREX^® tread coverings, and gloss black powder coat finish.

5’0” NON-CODE STEEL KIT WITH<br />
TREAD COVERS

5’0” NON-CODE STEEL KIT WITH TREAD COVERS

5’0” diameter metal kit with optional white oak tread coverings, no in-between spindles, 1.25” aluminum handrail. Homeowner painted stair satin black and clear coated tread coverings.

5’0” CODE STEEL KIT WITH TREAD COVERS

5’0” diameter metal kit with optional 2” hickory tread coverings and solid hickory flat profile handrail, triple in-between spindles, and matte black powder coat finish. Not shown; customer selected ornamental tread style G7.

5’0” VICTORIAN ONE^® CAST ALUMINUM KIT

5’0” diameter cast aluminum kit with optional double in-between spindles, scroll tread ends, 1.25” brass handrail with brass scroll handrail end, crowned princess design castings, custom over-sized landing and matching balcony landing rails. Stair painted by homeowner.